Hayward Pool Pump vs Intex Pool Pumps Review 2019

hayward pool pump

Hayward Pool Pump vs Intex Pool Pumps

One of the most frequently asked questions for pool owners is “which pool pump should I buy for my pool?” The most popular pool pump manufacturers are Pentair, Hayward, and Intex. In general, Intex pumps have excellent value (but can’t be repaired when damaged), while Hayward or Pentair equipment is significantly better but more expensive.

If you’re willing to invest in a high-quality pool pump, we recommend checking out our review about the best Pentair pool pumps to buy. Otherwise, you can keep reading our review here where we will compare Intex and Hayward pool pumps.

Since there is a lot of choice in the market, we will help you to choose the right one for your pool, but with the distinctive qualities. We have two of the most popular brands on our list and each has 2 different pump products (Hayward and Intex) that are all certified best-sellers in their own class. All products are offered by Amazon and are priced reasonably according to each category.


Hayward vs Intex Pool Pumps

What are the Best Intex Pool Pumps?

Here are two of the best Intex pool pumps which are the most powerful and the best-selling Intex pump brands in the market. The Intex 28643EG 1050 GPH Sand Filter Pump with GFCI (110-120 Volt) is best for above-ground pools. It has all-natural sand as its filter medium permitting pool enthusiasts an ideal water filtration system that could last up to 5 years or more before replacing.

Intex 28651EG 3000 GPH
Intex 28651EG 3000 GPH Sand Filter Pump with GFCI (110-120 Volt)

This low maintenance pump has a rated capacity of 1,050 GPH but could really deliver up to 1,200 GPH of water. The pump has complete accessory ranging from a 6-way valve, durable pressure gauge, strainer basket, heavy-duty tank, a very powerful motor, and a reliable timer. This pump is perfect for pool sizes having 2,800 to 8,400 gallons capacity.

On the other hand, the Intex 28651EG 3000 GPH Sand Filter Pump with GFCI (110-120 Volt) is basically the same as the Intex 28643EG in several features and design, only that this model has larger pump capacity at 3,000 GPH. This is ideal for larger water volume of swimming pools. Both pumps have the ability to filter, backwash, rinse, recirculate, drain, and close the system. This pump is ideal for pool sizes having a capacity from 5,500 to 19,000 gallons.

Both pumps are also equipped with a Ground Fault Circuit Interrupter (GFCI) which is primarily a safety feature. This switch (GCFI) shuts off the electrical power circuit when it senses that the current is flowing an unintended path, such as a person or through the water. This device makes the swimmers and maintenance men safer. The Intex pump motor for both models come in at 110-120 Volts.

What are the 3 Best Hayward Pool Pumps?

Our Rating
Hayward SP2610X15
Hayward SP3215X20
Hayward SP1580X15
Hayward SP15932S

1. Hayward SP2610X152S Super Pump 1.5HP Pool Pump

The Hayward SP2610X152S is one of the bestselling pool pumps from Hayward. It is a dual speed pool pump designed for in-ground swimming pools and spas. It’s a very powerful pump and this allows it to be used with pools of all sizes and types. It is also very easy to switch from one speed to the other.

The motor is designed with heavy-duty materials making it very durable. The Hayward SP2610X152S Super Pump is also fitted with a large debris basket and an equally big and transparent strainer.


  • Durable
  • The motors deliver high performance
  • The strainer cover can be removed easily through the included hand knobs
  • Installation is easy
  • The low-speed setting is very low
  • It is a bit costly

Check Price

2.Hayward SP1580 PowerFlo LX 1 HP Above-Ground Swimming Pool Pump

The Hayward SP1580 PowerFlo Pump is the highest rated Hayward pool pump for a very good reason. It is designed to ensure that your pool stays clean while keeping energy consumption down.

The Hayward PowerFlo also comes with a double-sized seal for enhanced performance. Its motors are made with automatic thermal overload protection which keeps the motor safe from excessive heat.

Hayward SP1580 PowerFlo

The Hayward pool pump is also fitted with an extra-large basket and a drain plug. It is also drip proof and operates quietly.


  • The 60-cycle motor boosts performance significantly
  • Durable
  • The drain plug and large debris basket makes maintenance easy
  • It doesn’t have a power a switch. The only way to turn it off is to unplug it

Check Price

3. Hayward SP1591PowerFlo Matrix 1.5HP Dual Speed Above-Ground Swimming Pool Pump

This powerful above-ground pool pump has made pool water maintenance a hassle-free task. It comes with a massive debris basket capable of collecting loads of dirt before you have to empty it. The basket is also fitted in a manner that allows you to remove and reattach it with utmost ease. We also liked the inclusion of an impeller which prevents clogging by leaves and other debris.

The motors of this Hayward pool pump are designed with automatic thermal overload protection. This boosts the motor’s performance while also extending its lifespan by keeping it safe from excessive heat.


  • Comes with a large strainer
  • Heavy-duty motor
  • The build quality is rather low

Check Price

Final Thoughts

Hayward’s expertise in the pool equipment industry is undebatable. They have given us excellent equipment in the past and the above three are the top of the cream when it comes to Hayward pool pumps.

Use the above guide to identify which of the three pumps is ideal for your pool. You can also use that information to check out other Hayward pool pumps in the market and see how they measure up to your needs.

While for the Hayward pool pumps, here are 2 of this product’s current best-sellers, the Hayward SP1580X15 Power-Flo LX Series 1-1/2-Horsepower Above-Ground Pool Pump with Cord and the Hayward SP15932S Power-Flo Matrix 1-1/2-Horsepower 2-Speed Above-Ground Pool Pump.

The Hayward Power-Flo LX Series has a transparent plastic basket so you can easily see what it filters and if it is time for a good clean. This pump could be used for either above- and in-ground pool with its pump motor rated at 1.5 Hp. This pump’s corrosion-free thermoplastic housing is quiet in operation under any weather condition. This pump is rated at 115-volt and 20 Amp. circuit breaker.

While the Hayward Power-Flo Matrix is also designed for above ground and in-ground swimming pools and has a 2-speed motor (1.5 Hp). This pump is certified energy efficient and could save you thousands of dollars every year for parts replacement and energy savings. The motor of this magnificent pump comes in at 115 volts.

Hayward pool pump parts are easily available in the online market (such as Amazon.com) so you have an assurance of replacement parts any time of the year.

So, what is the best pool pump for you?

All of the Hayward pool pumps and Intex models that we have mentioned above could be used in either an above-ground or in an in-ground pool. But each has its own specialization. Each brand does have specific functions to give every pool owner the cleanest and the efficient supply of water into your pool.

However, there could only be one choice that you have to make in purchasing the best pool pump for your swimming pool. We suggest that you pick either Intex 28643EG 1050 GPH or the Intex 28651EG 3000 GPH for larger above-ground pools that have sizes that range from 5,500 to 19,000-gallon capacity.

For in-ground pools, we recommend you use either the Hayward Power-Flo LX Series or the Hayward Power-Flo Matrix for a more durable type of pump.


Your swimming pool really needs a better pump to give you crystal clear water, to circulate the water in and out of the pool and makes you clean the pool for maintenance. In other words, the pump is the heart of your pool’s circulation system. Choosing the best pump for your pool (whether in-ground or above ground swimming pool) is a crucial decision.

It is great to know that you have a variety of choices when it comes to your picking the right pool pump for your swimming pool. That is why if it concerns choosing from Hayward Pool Pump vs Intex Pool Pumps, the choice depends upon the nature or type of your pool.

Intex 28120E 10′ x 30″ Easy Set Above Ground Inflatable Swimming Pool Review

Intex 10' x 30" Easy Set pool

Intex Above Ground Swimming Pool

One of the best brands for budget-friendly above ground swimming pool is the Intex 10’ X 30” Easy Set Above Ground Inflatable Swimming Pool that is just right for your budget. Since summer is around the corner, your family could still enjoy the hot and humid weather condition at this time while dipping in this kind of pool, which could be set up in no time. Intex products are just one of the world’s finest and they offer a wide array of sizes for swimming pools. This 10 feet (diameter) by 30-inch (depth) is just right for a family with a maximum member of 5.

While this pool is so easy to assemble, so does when it is time to strip down for storage when the season ends. Deconstructing the pool, by the way, is recommended by Intex when you have no plans of using the inflatable pool throughout winter or beyond the rest of the year to prolong its life.

Key Features and Benefits

Intex 10' x 30
Intex 10′ x 30″ Easy Set Above Ground Inflatable Swimming Pool | 28120E

Having an above ground pool in your backyard is much easy to maintain compared to an in-ground swimming pool. And like what we told you about, an above ground pool can be easily assembled and disassembled in just a matter of minutes where special skills are not required. This kind of pool is also cheaper and require only a small amount of space to be used.

Above-ground pools are also portable and can be easily assembled and moved in any leveled part of your backyard. This only means that you can easily installed these types of pool anywhere you wish and dismantle them when necessary. Another thing is, setting up an above ground pool is as easy as setting up a tent or a hammock. You just pick the right place and position it, then inflate it, and fill it with water.

While a permanent pool is too expensive to build, difficult and costly to maintain, and it can’t be moved or relocated when you need space. Here are some of our findings of the Intex 10’ X 30” Easy Set Above Ground Swimming Pool.


• No special tools are needed for assembly.
• Perfect size for a family of 5.
• Has a capacity of 1,018 gallons (3,854 liters) of water, with still about 6 to 10 inches of clearance from the edge of the pool.
• Included in the package are set up and maintenance DVD instructions.
• The upper pipe support (frame) is made from durable and strong PVC which has 0.32 mm wall thickness, while the bottom support is much thicker at 0.55 mm.
• The depth is variable to compensate for your kid’s height. However, maximum depth is up to 2.5 feet.
• Made from durable synthetic vinyl and circle-shaped which is relatively safe for children.
• Unfortunately, the price does not include the filter pump which is sold separately.

Video Review


The Intex 10′ x 30″ Easy Set Above Ground Inflatable Swimming Pool is definitely one-of-a-kind above ground pool which cost way below the $100 mark. This specially designed inflatable pool is no wonder why it leads as one of the market’s best-sellers and the favorite of more families across the United States.

This Intex inflatable swimming pool is truly spacious for an average family with 5 members which is the most convenient number for a great space inside the pool. Additionally, this pool is quite easy to assemble and taken down and can be enjoyed both by kids and adults.

Frequently Asked Questions on Pool Pumps

pool pump faqs

FAQ Pool Pumps

Swimming pool owners are sometimes facing with a dilemma on malfunctioning pool pumps. These simple trouble-shooting on your pump may help you save money for the more expensive electrician’s fee, or worst, replacing your pump when the problem (electrical or mechanical causes) got worse.

1. Why pump is running but does not give enough water?
Pumps need to have its suction side filled with water to “feed” on it. If the suction side does not have enough water prior to starting the pump motor, the pump would only suck air leaving a vacuum. This process is called “priming”.
Here are some causes of the pump not being primed or not primed enough:
a) When the water dropped below the skimmer and the drain levels, leaving the space between the pump’s suction side void with water.
b) The pipeline going to the pump inlet is clogged-up with debris and water does not flow freely.

2. Why the pump keeps on humming then trips breaker?
a) Probably a bad capacitor. Check it by means of an ohmmeter. The right reading would be a drop to zero then a slow rise of resistance (in ohms).
b) The pump’s impeller might be stocked up with leaves or other hard debris. Manually turn the impeller shaft freely to find out if it is stocked. If stocking up, remove the motor from the pump and clean the impeller.
c) Probably worn out bearings. Try to manually turn the impeller shaft and if you feel rough, screeching sound and slightly uneven rotation, it’s time to change bearings.
3. How should you able to know the pump’s specifications (like power, voltage, and flow rate)?
Brand new pumps with accompanying motor have nameplate attached to the housing of the motor which bears all the information and specifications of the motor (such as voltage, amperes, horsepower, rpm, and other information.
The pump itself has nameplate specifying its flow rate, the speed of impeller at certain pump horsepower (hp) and its direction of flow (usually an arrow indicator) counterclockwise or clockwise.
4. How does a pool pump works?
Pool pump works through a loop system which means that the water from the pool is being recycled (and re-chlorinated) after it is strained and filtered.
It starts by drawing water from the pool via the skimmer which acts as a small reservoir where a significant amount of water is stored so that the pump will not be dehydrated. The water then goes through a strainer (the pool pump gives the vacuum pressure to suck this water through the inlet pipe), initially filtering large debris.
The water (going through the pump’s outlet pipe) then goes to the cartridge filters to remove any remaining debris. Then the water passes through the heater (this is optional for the too cold environment) to increase the temperature of the pool water to your desired temperature. After this, the water is treated with chlorine (with a chlorinator) at the allowable amount, and then the water returns to the pool.
5. How should I know if the pump is right for my pool?
Sizing a pump is not elaborate after all! Oversize pool pump may give you a higher operating cost in the long run. The general rule is: The pump should filter all the water in the pool in an 8-hour period. By abiding on this rule you will save a lot and your pump may last longer than normal.
So, you should know your pool’s water capacity (volume), and then pick a pump that has the flow rate (remember the nameplate on the motor) that would match the volume of water of your pool. Say, a 24,000 gallons (volume) pool size will be emptied with 50 gallons per minute (flow rate) in 8 hours.
You may calculate the volume of your pool (if rectangular) by this formula: length x width x height (in cubic feet or gallons).
Some motor has low flow rate but with high power rating (hp), this combination makes the motor more stable, but with higher operating cost. Standard power rating used in standard family size pool range from 1to 2-hp, pick the size that you thought would be appropriate for your pool depending on the frequency of use and the number of users because the many users are, the more frequent the pool should be cleaned.
Pump’s suction and discharge pressure could be controlled with the gate valves on the piping system by throttling these valves if the need arises.
6. How can I winterize my above ground pool pump?
After winterizing your pool, the next step would be winterizing your above ground pool pump. Check and clean the cartridge filter and strainer. Drain water from the pump, filtering and heating systems as the water that remains could freeze during winter.
Plug open-ended pipes as water may seep through them and freeze when uncovered. After making sure that there is no more water remains in the system, cover the pump as well as the filter, heater and the piping system to protect them from the elements.
7. Does the pool pump keeps the pool’s bottom and wall clean?
No, it does not. The pump only cleans the water on the pool. To protect your pool, you may cover it from leaves and other debris. And the best time to clean the pool is before using it while it has no water yet and after winterizing.
8. How long do motor of pool pump last?
According to experts, the motor for pool pump lasts an average of 8 years. This may need either replacing or rebuilding. The motor that screeches, noisy and with squeaking bearings (either front or rear) need to be replaced both at the same time. It is not advisable to change only one bearing when needed.
Burnt motor (probably due to overheating or defective bearings) can be rewound (windings) then install again, but this may not last long and may become a fire hazard if not properly maintained.
9. How can I keep the motor and pump last longer?
You can keep the pump to last much longer than expected by keeping the impeller free from debris. By this, your filter and strainer should be in good condition, so keep them the mesh always in good condition.
As for the drive assembly, always check the motor for defective bearings and replace them immediately if you find any sign of wear. Also, don’t keep the motor running without water in circulation; this will overheat the motor and the pump.

Tips on How to Effectively Do Swimming Pool Maintenance in 2019

Tips on How to Effectively Do Swimming Pool Maintenance

Swimming Pool Maintenance

Swimming pool maintenance is an integral part of keeping your pool clean, with sparklingly white water, hygienic, algae-free, healthy and most of all, cost-effective. We will teach you how to care for your pool using basic techniques that do not require expensive purchases for tools and other necessities (such as equipment).

Caring for your pool need not be elaborate and cumbersome, although all pools are different, they share a common denominator. The secret to its crystal clear water and hygienic pool state as a whole are utmost care and routine maintenance.

Above Ground Pool Maintenance

If you choose to tackle common problems, like muddy or turbid water or broken pipe, etcetera, be sure to consult first the manufacturer’s supplied Owner’s Manual before you fix and use equipment on your own.

Above Ground Pool Maintenance

Every above ground pool owner certainly wants their pool water blue (this color indicates pristine water) and crystal clear for enjoyable use every day. The pool should also be cleaned and tidy every use. Clear and pristine water is useless when its container is in itself unclean and unhygienic.

The pool (exterior and interior walls) should be cleaned with brush and soap (or detergent) and flush with clean water. Molds and algae should be absent during operation and when not in use. Floating debris should be skimmed by hand every few days because they will eventually sink if not immediately cleaned.

You can use handled net in removing floating bugs, leaves and other debris. This skimming significantly adds to the efficient circulation of the water and lowers the amount of chlorine to use. The pool should also be vacuumed at least weekly to minimize algae and calcium build up and keep the water clear.

Pool Filter Maintenance

There are 3 different kinds of filter used in swimming pools, namely: cartridge, sand and diatomaceous earth. Each has its own method of cleaning and maintenance procedures. Manufacturers list these methods in their manuals. However, all types need to be cleaned periodically depending on the type o filter medium and the frequency of use of the pool.

The pool filter should be checked and cleaned according to the manufacturer’s recommendation to help decrease the added chemical and to have a smooth flow of water. Smooth water flow enhances efficient pump and eliminates possible over speeding of the motor. This over speeding may cause the motor to overheat and consequently burn the motor, especially if your electrical system is not equipped with GCFI.

The best time to clean your filter is when there is a large disparity between the pressure gauge and flow meter reading (typically between 10- 15 psi). Manufacturers recommend that a little dirt on the filter may help in trapping fine debris, but the massive amount of this dirt will also clog up the filter. The pressure difference we stated earlier is the clear indication of the right timing for cleaning the filter.

Pool Maintenance Cost

An average swimming pool maintenance cost should not be a burden for pool owners. The cost of maintaining your pool varies depending on its size, frequency of use, pool system, its features (such as a heater, chlorinator, winterizing method, and others) and if you are planning to do it yourself. Certainly, doing the maintenance yourself could bring the cost down tremendously.

The DIY (do-it-yourself) approach is a choice for pool owners especially if they know or familiar with basic pool chemistry. As we have said, this is not rocket science. Another thing is: they must be willing to put more time into this activity.

Balancing the water chemistry of your pool water is the most delicate task. This could be done manageably using an inexpensive testing kit and proper chemicals that could be purchased online. All have instructions on their proper use.

Salt-water Pool Maintenance

Maintaining a good saltwater pool is also not difficult to do. Operating a salt water pool has many benefits compared to another medium. For one, the water is kept soft which minimizes the formation of algae and calcium. Algae are bad for people’s health while calcium deposit is bad for the piping system and its accessories.

Saltwater pool also requires a minimum of maintenance and lower cost of operation. Although some pool owners believed that salt water pool is maintenance-free, there are also minimum cares required to maintain a stable swimming pool for the family.

Saltwater pool should be tested weekly and monthly for its pH (should be at 7.2-7.6 level), alkalinity, calcium content, free-chlorine level (typically 1-3 ppm) and salt content. Water could be tested using test strips or with a drop test kit.

Visually inspect and clean the cell every 3 months for better performance. Also, keep the filter, pump, and skimmer clean all the time. Smooth water flow will be impeded if these parts are full of debris. Once the water flow is decreased, there is a possibility for the chlorinator to stop producing chlorine.

Hayward SP1580X15 Above-Ground Pool Pump with Cord Review

Hayward SP1580X15 Power-Flo LX Series 1-1/2-Horsepower Above-Ground Pool Pump with Cord Review

Hayward SP1580X15 Pool Pump

Above ground pool pumps are an essential part of a good hygiene for swimming pools that provide enjoyment, fun and luxury to users. This type of pool pump regulates (or specifically circulates) the water in the pool to make it crystal clear, clean and hygienic.

The Hayward SP1580X15 Above-Ground Pool Pump is one of the best examples of this type of pump. Discover more of its amazing features which set the standards for value and capability.

Main Features of Hayward SP1580X15

• Longer Motor Life

This 1.5-hp, rated 115-volt pump is totally dip-proof because of its double-size and heat-proof seals making it more resistant to wear and tear that enhance longer life for the motor, therefore prolonging the life of the pump.

• Industrial-size Debris Basket and Heavy-duty Casing

The debris basket of this product can hold up to 118cu. in. of debris. This large volume will enable the pump for a minimum of maintenance allowing you to save more money in your electric bill. The heavy-duty all-weather pump casing is a reinforced and corrosion-resistant thermoplastic housing permitting the quietest of operation.

Hayward SP1580X15 Above-Ground Pool Pump Infographic
Hayward SP1580X15 Above-Ground Pool Pump Infographic

• Comes with Strainer

This Power-Flo FX Series comes in 91GPM (at 20 Feet of Head) capacity and with a durable strainer that can collect large debris, such as small stone, leaves and other large objects that may flow through its 1-1/2inch suction (intake or port) pipe. Its discharge pipe is also 1-1/2inch in diameter which produces enough pressure for quick cleaning of the pool.

Hayward SP1580X15 Power-Flo LX Series 1-1/2-Horsepower Above-Ground Pool Pump with Cord

• Self-lubricating Bearings, Low Maintenance

One other reason why this pump has low maintenance is that of its self-oiling bearings which contribute much to its efficiency and durability. The bearings remain lubricated while in operation as they are designed as such.

• Auto Shut Off

The pump is proven safe to operate even when current from the grid fluctuates or if overloading is inevitable because the motor is equipped with an automatic thermal overload relay system that automatically shuts off the motor when it is overheated or overloaded due to unavoidable circumstances.


Also auto-start: The motor also automatically starts when safer heat level inside the motor is reached. A real safety feature unique from other brands.
Quality material: The pump is made from patented PermaGlass XL which is high-strength and very tough, especially on vibration.
Easy to install: This pump can be installed easily because it has an only minimal piping system and the pump comes to you fully assembled.
No filter and heater included: This very affordable pool pump does not come with filter and heater, but they can be ordered separately and could be installed with minimum of modification in case you have assembled the pump system already.

Buying Guide

To better serve your requirements for pool pump, look for the best quality like the one tackled above which is proven safe, durable, and affordable and the finest quality among other brands.

Review Summary

The Hayward SP1580X15 Power-Flo LX Series 1-1/2-Horsepower Above-Ground Pool Pump is an ideal pump for a medium-size pool for the family. Its capacity, large basket, low maintenance, voltage-rating, port size, and heavy-duty materials can really save you lots of time and money.

Check Price